Thermal Conductivity Performance of 2D hBN/MoS2/Hybrid Nanostructures Used on Natural and Synthetic Esters

Jaime Taha-Tijerina, Helio Ribeiro, Karla Aviña Camarena, Juan Manuel Martínez, Ana Paula Godoy, Josué Marciano de Oliveira Cremonezzi , Milene Adriane Luciano, Marcos Antônio Gimenes Benega , Ricardo Jorge Espanhol Andrade , Guilhermino José Macedo Fechine , Ganguli Babu, Samuel Castro

Resultado de la investigaciónrevisión exhaustiva

1 Cita (Scopus)

Resumen

In this paper, the thermal conductivity behavior of synthetic and natural esters reinforced with 2D nanostructures—single hexagonal boron nitride (h-BN), single molybdenum disulfide (MoS 2), and hybrid h-BN/MOS 2—were studied and compared to each other. As a basis for the synthesis of nanofluids, three biodegradable insulating lubricants were used: FR3™ and VG-100 were used as natural esters and MIDEL 7131 as a synthetic ester. Two-dimensional nanosheets of hBN, MoS 2, and their hybrid nanofillers (50/50 ratio percent) were incorporated into matrix lubricants without surfactants or additives. Nanofluids were prepared at 0.01, 0.05, 0.10, 0.15, and 0.25 weight percent of filler fraction. The experimental results revealed improvements in thermal conductivity in the range of 20–32% at 323 K with the addition of 2D nanostructures, and a synergistic behavior was observed for the hybrid h-BN/MoS 2 nanostructures.

Idioma originalEnglish
Número de artículo1160
Número de páginas13
PublicaciónNanomaterials
Volumen10
N.º6
DOI
EstadoPublished - jun 2020

All Science Journal Classification (ASJC) codes

  • Materials Science(all)

Huella Profundice en los temas de investigación de 'Thermal Conductivity Performance of 2D hBN/MoS2/Hybrid Nanostructures Used on Natural and Synthetic Esters'. En conjunto forman una huella única.

Citar esto