Surface temperature and heat transfer coefficient determination during quenching for martensite fraction prediction using a parabolic heat transfer model

D. E. Lozano, R. D. Mercado-Solís, R. Colás, L. F. Canale, G. E. Totten

Resultado de la investigación

1 Cita (Scopus)

Resumen

A simplified method is presented to predict the transient temperature distributions in a cylinder during quenching. The model is based on the assumption that the radial temperature distribution follow a parabolic-type behavior. To validate the model, AISI 304 stainless steel cylindrical samples (08 mm) were instrumented with thermocouples for temperature data acquisition during quenching. The samples were heated to 900°C followed by quenching in water-base salt solutions. Based on the results of the model, in conjunction with the transformation diagrams of the alloy, it was possible to predict the martensite fraction formation in the radial direction. A practical example of the use of the predicted transient temperature distributions and martensite fraction at various radial depths is presented in this paper for a partially decarburized AISI 5160 steel. Copyright © 2012 ASM International® All rights reserved.
Idioma originalEnglish
Páginas746-754
Número de páginas9
EstadoPublished - 1 dic 2012
Publicado de forma externa
EventoQuenching Control and Distortion - Proceedings of the 6th International Quenching and Control of Distortion Conference, Including the 4th International Distortion Engineering Conference -
Duración: 1 dic 2012 → …

Conference

ConferenceQuenching Control and Distortion - Proceedings of the 6th International Quenching and Control of Distortion Conference, Including the 4th International Distortion Engineering Conference
Período1/12/12 → …

Huella Profundice en los temas de investigación de 'Surface temperature and heat transfer coefficient determination during quenching for martensite fraction prediction using a parabolic heat transfer model'. En conjunto forman una huella única.

  • Citar esto

    Lozano, D. E., Mercado-Solís, R. D., Colás, R., Canale, L. F., & Totten, G. E. (2012). Surface temperature and heat transfer coefficient determination during quenching for martensite fraction prediction using a parabolic heat transfer model. 746-754. Papel presentado en Quenching Control and Distortion - Proceedings of the 6th International Quenching and Control of Distortion Conference, Including the 4th International Distortion Engineering Conference, . https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84872035787&origin=inward