Evaluation of anti-wear properties of metalworking fluids enhanced with halloysite nanotubes

Laura Peña-Parás, José Antonio Sánchez-Fernández, Carlos Rafael Martínez, José Abraham Ontiveros, Karla Itzel Saldívar, Luis Manuel Urbina, Moisés Jair Arias, Patricio García-Pineda, Brenda Castaños

Producción científicarevisión exhaustiva

10 Citas (Scopus)


The study of nanoparticles as additives for metalworking fluids (MWFs) with applications in the metal removal processes, or machining, has received increasing attention due to the possible enhancements on tribological properties. In this study, low-cost and environmentally friendly nanoparticle additives of halloysite clay nanotubes (HNTs) were dispersed in metalworking fluids utilized for milling processes. Concentrations of 0.01, 0.05, 0.10 wt. % were incorporated into a mineral oil (MO) and a semi-synthetic fluid (SF) by ultrasonication. The anti-wear properties of metalworking nanofluids were characterized with a T-05 block-on-ring tribotester at a contact pressure of 0.5 GPa. Surface roughness of worn block materials was obtained with an optical 3D surface measurement system. Results showed that at a concentration of 0.10 wt. % HNTs block mass loss was lowered by 24% for the MO + HNTs nanofluids. For the SF + HNTs, a reduction of 63% and 32% in wear mass loss and coefficient of friction (COF), respectively, were found at the same concentration. The tribological enhancing mechanism for the applied contact pressure was proposed to be due to a reduction of the area of contact and nanoparticle sliding between surfaces with no HNT deposition, evidenced by energy dispersive spectrometry (EDS). Furthermore, surface roughness studies of worn blocks showed smoother surfaces with lower groove density with the addition of nanoparticle additives. The results of this study demonstrate that HNTs can improve the lubricity of metalworking cutting fluids used for machining processes, enhancing tool life and providing better surface finish of products.

Idioma originalEnglish
Número de artículo1019
PublicaciónApplied Sciences (Switzerland)
EstadoPublished - 3 oct 2017

All Science Journal Classification (ASJC) codes

  • Ciencia de los Materiales General
  • Instrumental
  • Ingeniería General
  • Química de procesos y tecnología
  • Informática aplicada
  • Procesos de transferencia y flujo de líquidos


Profundice en los temas de investigación de 'Evaluation of anti-wear properties of metalworking fluids enhanced with halloysite nanotubes'. En conjunto forman una huella única.

Citar esto