Abstract
In this work, we present the characterization of a Form 3 Stereolithography (SLA) FormLabs 3D printer which will be used for the fabrication of optical components. The characterization consisted of the measurement of the refraction index, absorbance & transmittance values, as well as geometrical parameters like radius of curvature, thickness, roundness, and angles. This study proved that with the Form 3 SLA additive technology components with good quality that meet the design parameters can be fabricated.
| Original language | English |
|---|---|
| Article number | 012026 |
| Pages (from-to) | 012026 |
| Journal | Journal of Physics: Conference Series |
| Volume | 2307 |
| Issue number | 1 |
| DOIs | |
| Publication status | Published - 2022 |
| Event | 11th International Congress of Physics Engineering, CIIF 2021 - Mexico City, Mexico Duration: 26 Sept 2021 → 29 Sept 2021 |
Bibliographical note
Funding Information:We thank the financial support for this project from the DGAPA-UNAM, through the grant PAPIIT No: IT100321, "Evaluacion de superficies opticas de forma libre fabricadas mediante manufactura aditiva". Bautista-Hernandez thank the CONACyT (Mexico) the graduate studies scholarships granted No. 811666.
Funding Information:
We thank the financial support for this project from the DGAPA‐UNAM, through the grant PAPIIT No: IT100321, "Evaluación de superficies ópticas de forma libre fabricadas mediante manufactura aditiva". Bautista-Hernandez thank the CONACyT (México) the graduate studies scholarships granted No. 811666.
Publisher Copyright:
© 2022 Published under licence by IOP Publishing Ltd.
All Science Journal Classification (ASJC) codes
- General Physics and Astronomy